ProductsGPM

Wet Powder Impregnation/Continuous Carbon Fiber Reinforced Thermoplastic UD-tape Production Line

  • Wet Powder Impregnation/Continuous Carbon Fiber Reinforced Thermoplastic UD-tape Production Line
  • Wet Powder Impregnation/Continuous Carbon Fiber Reinforced Thermoplastic UD-tape Production Line
  • Wet Powder Impregnation/Continuous Carbon Fiber Reinforced Thermoplastic UD-tape Production Line
  • Wet Powder Impregnation/Continuous Carbon Fiber Reinforced Thermoplastic UD-tape Production Line
  • Wet Powder Impregnation/Continuous Carbon Fiber Reinforced Thermoplastic UD-tape Production Line
  • Wet Powder Impregnation/Continuous Carbon Fiber Reinforced Thermoplastic UD-tape Production Line
  • Wet Powder Impregnation/Continuous Carbon Fiber Reinforced Thermoplastic UD-tape Production Line
  • Wet Powder Impregnation/Continuous Carbon Fiber Reinforced Thermoplastic UD-tape Production Line

The continuous carbon fiber thermoplastic suspension method is quite different from the thermoplastic  melting method. The ultrafine resin powder, solvent and additives are mixed into slurries of different  concentrations, and with the continuous carbon fiber to be spread, impregnated and dried, pre-melting,  shaping, trimming, rolling and other multi-step molding processes. Compared with thermosetting  unidirectional tapes, slurry method thermoplastic unidirectional tapes have: higher strength and modulus;  high molding efficiency; can be stored at room temperature; resistant to high temperatures and high  humidity; recyclable; and excellent weldability. 

GPM equipment advantages: 

1.Spreading yarn with density increasing device 

2.Independent high-frequency vibration yarn spreading system 

3.The electromagnetic heating roller has a maximum temperature resistance of    450 degrees Celsius

4.The oven is equipped with an IR heating system, and the maximum heating temperature is above 600  degrees Celsius. 

5.The entire line adopts a full servo control system 

6.Optional slurry concentration adjustment system


Technical parameters

ModeCFRT-UDS-CF
Resin PowderPEEK,PEKK,PPSProcessing Temperature 350-420℃
Product width (mm)20-200mmLine speed (m/min)1-3m/min
Product thickness (mm) 0.16-0.2mmCarbon Fiber Type3K/12K/24K
Fiver content45-62%
Density1.58-1.6g/m3


Inquiry

Copyright © 2018 GPM Machinery (Shanghai) Co.,Ltd.  Powerby:Injnet   sitemap.xml